Photos(7)
Rough Terrain Forklifts
Call for price
Ina Store, Inc.
Contact:Sales Department
Phone:(231) 825-2575
Tustin, Michigan 49688
(231) 825-2575
General
Description
CASE 586H — ROUGH TERRAIN FORKLIFTWhen it’s time to take stuff vertically, it’s time for a CASE 586H forklift. With a lift capacity of 6,000 lbs., it can raise heavy materials – pipes to pallets – and do it quicker, easier and smoother. The lift speeds are fast without compromising stability or control of the load, allowing two full lift/load cycles in less than a minute. And with road speeds up to 24 mph, that means all business all the time. The zero tailswing offers more confident maneuvering. Plus, with our exclusive Load Control, you get a smooth trip, even over unkind surfaces. Operation is simple and intuitive. And with many mast and cab options, this forklift is ready to get down to the business of going up.LIFTS YOUR OPERATION TO NEW HEIGHTSHere’s a way to expand your reach at any yard or jobsite. CASE H Series rough terrain forklifts are true weightlifters, getting jobs done smoother, easier and faster. For starters, these proven workhorses are built on the same chassis as our loaders and backhoes, so they’re up to any task. CASE Forklifts can go over all kinds of uneven ground too, thanks to our exclusive Load Control that minimizes shock to the load and increases material retention. The pace at which they work is mesmerizing. They reach road speeds of up to 24 mph, and they lift material swiftly and smoothly. You can now opt for the factory-designed, built and installed enclosed cab with heat and AC, so operating in extreme frigid or sweltering temps is no longer a problem. There are plenty of mast options and component configurations to meet your operational needs for fork lengths, carriage types and even backrests. And with the support of our expansive CASE dealer network, you can be sure these machines will keep lifting all kinds of things, including your operation.FEATURESPLENTY OF MAST MOVEMENT & OPTIONSWhen it comes to mast options, CASE can get you where you need to go. Choose from various mast options (ranging from 11- to 22-ft), standard and free lift. There are also various carriage and backrest sizes as well as fork types/lengths and even fork positioning options. The movement is monumental. Between a 45-degree forward tilt and a 15-degree rear tilt, the H Series forklift offers the most mast tilt in the industry, allowing operators to retain loads over tough terrains and get into a variety of tough spots. With a standard side shift of 3 in. in either direction and the optional power positioning forks, operators can precisely place their loads. Plus, our superior forklift mast meets height restrictions, so transporting it is hassle-free on just about any trailer out there – and with 45-degree forward tilt, the machine can trailer to minimal transport heights when the mast is tilted all the way forward. If low clearances are an issue, CASE offers freelift masts that allow you to raise the forks 5 ft. off the ground prior to the mast protruding, keeping your overall travel height lower. ENCLOSED CAB OPTIONThe optional enclosed H Series cab gives operators the ability to work in all conditions. With heat and air conditioning providing climate control, as well as noise and dust suppression, work keeps going no matter what Mother Nature has in store. Plus, the wide doors open completely and secure tightly, so you can keep them open for warmer conditions and communication with other crewmembers. An overhead roof window gives you visibility to loads above your head. And there are LED lights on the front and rear, along with front and rear wipers with washer to keep your view clean and bright. ULTIMATE MANEUVERABILITYCASE incorporates a zero tailswing forklift design of the rear counterweight and steering axle. Operators can rest easy and turn confidently knowing that once the tires clear an object – even at full turn – the rear counterweight will, too.SMOOTHER OPERATIONDesigned by CASE, Load Control automatically provides on-the-go mast cushioning that lessens load shock when traveling over uneven terrain. Not only does this help stabilize the load and improve material retention; it makes for a smoother, more comfortable ride for the operator. Load Control minimizes the bumps and rough terrain felt by the operator, accentuated by heavy loads that want to pull the machine around as the operator navigates that terrain. MAINTENANCE-FREE TIER 4 FINAL EMISSIONS SOLUTIONSH Series rough terrain forklifts use a Diesel Oxidation Catalyst to meet Tier 4 Final emissions standards. That means no maintenance. No Diesel Exhaust Fluid (DEF) to add. No Diesel Particulate Filter to replace. And no regeneration time required. Just get in and go.SEE MORE, DO MOREWithout a disruptive third mast, our wide-channel, dual-mast design gives the H Series forklift unmatched visibility. Narrow operating consoles further help increase front view so operators can easily watch forks enter pallets and can confidently secure materials. Even at top lift heights, the perforated steel canopy or overhead cab window give operators clear vision without the neck-straining need to lean forward.STANDARD EQUIPMENTOPERATOR ENVIRONMENTROPS/FOPS certified protective canopy (or optional CAB with heat and air conditioning); Wide walk through platform; Vinyl seat; 3 in (76 mm) seat belt; Molded front fenders; Rearview mirrors, left and right.Gauges: Hour meter; Engine RPM; Engine coolant temperature; Transmission oil temperature; Job timer; Fuel level.Warning lights: Air cleaner restriction; Alternator; Cold start; Engine oil pressure; Hydraulic oil filter bypass; Parking brake engagement; Engine coolant temp; Battery voltage.Audible alarms: Coolant temperature; Engine oil pressure; Parking brake engagement; Converter oil temperature; Backup; Horn.ENGINE• FPT 3.4 L Diesel• Cooled EGR• Diesel Oxidation Catalyst• Full flow engine oil filter• Air cleaner:• Replaceable dry type with radial seal• Radiator with de-aeration bottle• Antifreeze to -34°F (-37°C)• Foot throttle• Self adjusting belt• Insulated CCV hose• Glow Plugs• Block Heater• Pre Cleaner• Master Disconnect Switch• Remote Jump Start Terminals for BatteryDRIVETRAIN• Front axle, as selected:• 2/4WD heavy-duty outboard planetary drive, with 19.5 L x 24 tires• Rear axle:• 2WD heavy-duty front axle with 11 L x 16 tires• 4WD heavy-duty mechanically driven rear axle, with 12 L x 16.5 tires• 4F-4R Power Shuttle• Synchromesh Transmission• Torque converter• On-the-Go electric 4WD control• Electric F/R shuttle control• Electric differential lock control,• with push-button activation• Park brake, spring applied, hydraulic releaseHYDRAULICS• Heavy-duty hydraulic oil cooler• 7 micron, spin-on oil filterMAST• Lift capacity to full height w/ 24 in load center:• 15 ft Std. Mast 6,000 lb (2 722 kg)• 22 ft Std. Mast 3,000 lb (1 361 kg)MAST TYPE• 15 ft Std. Mast 2 Stage Roller Mast• 22 ft Std. Mast 3 Stage Roller MastLIFT SPEED• 15 ft Std. Mast 107 ft/min (0.55 m/s)• 22 ft Std. Mast 112 ft/min (0.57 m/s)OTHER• Storage Compartment, lockable• Swing out side panel engine access• Front/rear tie downs• Reflective logos• Light Package:• 2 front halogen driving lights• 2 rear halogen work lights• 1 rear tail/stop light• 2 front turn signals• 2 rear turn signals• Hazard warningOPTIONAL EQUIPMENTOPTIONAL MASTS/FORKS/CARRIAGES AVAILABLE• Straight and Freelift masts of varying heights (11- to 22-foot)• Carriages and backrests of varying sizes (60-inch and 84-inch are most common)• Fork lengths (most common is 48-inch, but longer versions are available)• Hook and Shaft type forks• Hydraulic fork positioningHYDRAULICS• 4 section valve for auxiliary hydraulicsOPERATOR ENVIRONMENT• Cab with heater and air conditioning, 2-door entry with 180-degree secured operation, tinted glass, LED front and rear working lights and signals, mechanical suspension seat, front and rear wipers, rear view mirrors, radio with bluetooth, USB power outlet, cup holder, phone holder, rubber floormat, and full ROPS/FOPS certification• Load control• Deluxe suspension seat, with lumbar support and high adjustmentsOTHER• Special paintSimilar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.
ENGINE
Model
FPT F5HFL463D
Emissions Certification
Tier 4 Final
Type
Diesel, 4-stroke, turbocharged
Cylinders
4
Bore/Stroke
3.9 in x 4.33 in (99 mm x 110 mm)
Displacement
207 in³ (3.4 L)
Fuel injection
Direct high pressure common rail
Fuel
Diesel
Cooling
Charged air
Engine speeds*
RPM
Rated speed, full load
2200
Low idle
900 - 1000
High idle, no load
2330 - 2430
Gross Horsepower @ 2200 RPM
74 hp (55 kW)
Net Horsepower @ 2200 RPM
68 hp (51 kW)
Gross Maximum torque @ 1400 RPM
233 lb·ft (316 N·m)
Net Maximum torque @ 1400 RPM
220 lb·ft (298 N·m)
Torque rise at rated speed
35% +/- 5%
Radiator - Core size area
486 in² (3 145 cm²)
Radiator - Rows of tubes
5
33° fan - Style
7 blade suction
33° fan - Ratio
1.1:1
Engine oil
CJ-4 – semi-synthetic 10W40
Pump operating angle ratings - Side-to-side
Rated 35°
Pump operating angle ratings - Fore and aft
Rated 35°
Pump operating angle ratings - Oil filtration
Replaceable, spin-on
Note
*Meets federal emission regulations
DRIVETRAIN
Transmission – standard
4F-4R Power Shuttle | Synchromesh Transmission manual gear shift fully synchronized
Gear ratios
Forward/Reverse
1st
5.603/5.603
2nd
3.481/3.481
3rd
1.584/1.584
4th
0.793/0.793
Travel speeds
mph (kph)
1st
3.8 (6.1)
2nd
6.1 (9.8)
3rd
12.8 (20.6)
4th*
24.0 (38.6)
Torque converter ratio
3.01
Differential lock
On-the-go push-button activation
Drive/steer axle
Differential ratio
2.5/2.0
Planetary hub ratio
6.4/6.0
Total reduction ratio
16.0/12.0
Service brakes
Individually applied, hydraulically actuated, outboard mounted, wet disc, 2 per side
Parking brakes
Transmission Mounted spring applied hydraulic release – SAHR
Note
*Travel speeds at 2330 engine RPM w/ 19.5 L x 24 tires.
ELECTRICAL
Voltage
12 Volts
Alternator
120 amp
Battery
950 cold-cranking amps
Power plugs – 2
30 amps total
OPERATOR ENVIRONMENT
Features
ROPS/FOPS certified protective canopy; Wide walk through platform; Vinyl seat; 3 in (76 mm) seat belt; Molded front fenders; Rearview mirrors, left and right.
Gauges
Hour meter; Engine RPM; Engine coolant temperature; Transmission oil temperature; Job timer; Fuel level.
Warning lights
Air cleaner restriction; Alternator; Cold start; Engine oil pressure; Hydraulic oil filter bypass; Parking brake engagement; Engine coolant temp; Battery voltage.
Audible alarms
Coolant temperature; Engine oil pressure; Parking brake engagement; Converter oil temperature; Backup; Horn.
OPERATING WEIGHT
Configuration 1 – Lightest
13,682 lb (6 206 kg) | 2WD, 15 ft Std. Mast, 48 in forks
Configuration 2 – Heaviest
14,621 lb (6 632 kg) | 4WD, 22 ft Std. Mast, 48 in forks
HYDRAULICS
Pump
Gear pump
Capacity
18 gal/min @ 3,000 psi (68 L/min @ 207 bar)
SERVICE CAPACITIES
Fuel tank
31 gal (119 L)
Hydraulic system
Total
74 qt (70 L)
Reservoir w/ filter
58 qt (55 L)
Reservoir w/o filter
56 qt (55 L)
Transmission
2WD Total
19.5 qt (18.5 L)
2WD Reservoir
12.6 qt (11.9 L)
4WD Total
22.0 qt (20.8 L)
4WD Reservoir
15.2 qt (14.4 L)
Front axle
Differential and Planetaries
14.4 qt (13.6 L
Rear axle
Differential and Planetaries
5.8 qt (5.5 L) | 0.7 qt (0.7 L)
Engine oil w/ filter
8.5 qt (8.0 L)
Cooling system
18.3 qt (17.3 L)
MAST
Lift capacity to full height w/ 24 in load center
15 ft Std. Mast
6,000 lb (2 722 kg)
22 ft Std. Mast
3,000 lb (1 361 kg)
Mast type
15 ft Std. Mast
2 Stage Roller Mast
22 ft Std. Mast
3 Stage Roller Mast
Lift speed
15 ft Std. Mast
107 ft/min (0.55 m/s)
22 ft Std. Mast
112 ft/min (0.57 m/s)
TIRES
Front - 2/4WD
19.5 L x 24, 12-ply rating
Rear - 2WD
11 L x 16, 10-ply rating
Rear - 4WD
12 L x 16.5, 10-ply rating
TURNING DIAMETER
2WD
w/ brakes
21 ft 8 in (6.57 m)
w/o brakes
26 ft 1 in (7.93 m)
4WD - engaged
w/ brakes
20 ft 5 in (6.21 m)
w/o brakes
27 ft 10 in (8.47 m)
4WD - disengaged
w/ brakes
21 ft 6 in (6.61 m)
w/o brakes
26 ft 1 in (7.95 m)
DIMENSIONS
Mast
15 ft (4.57 m) Std. Mast | 22 ft (6.71 m) Std. Mast
Overall Height to Top of Mast (Mast Closed)
10 ft 7 in (3.23 m) | 10 ft 7 in (3.23 m)
Overall Operating Height (Mast Raised to Full Height)
18 ft 0 in (5.49 m) | 25 ft 2 in (7.67 m)
Maximum Fork Height (Forks Horizontal)
15 ft 0 in (4.57 m) | 22 ft 0 in (6.71 m)
Maximum Freelift fork height
3 in (76 mm) | 2 in (51 mm)
Overall Height to Top of ROPS - 19.5 L x 24, 12-ply
104.1 in (2 645 mm) | 104.1 in (2 645 mm)
Overall Length with 48 in Forks
16 ft 2 in (4.93 m) | 16 ft 3 in (4.95 m)
Wheelbase – 2WD
84 in (2.13 m) | 84 in (2.13 m)
Wheelbase – 4WD
84.5 in (2.15 m) | 84.5 in (2.15 m)
Ground Clearance- 2WD
10.3 in (260 mm) | 10.3 in (260 mm)
Ground Clearance - 4WD
10.3 in (260 mm) | 10.3 in (260 mm)
Forward Mast Tilt
45° | 45°
Backward mast tilt
15° | 15°
Overall width – outside tires
7 ft 0 in (2 117 mm) | 7 ft 0 in (2 117 mm)
Mast side shift – right
3 in (76 mm) | 3 in (76 mm)
Mast side shift – left
3 in (76 mm) | 3 in (76 mm)